RAV4 4-Door 4WD L4-2.0L (3S-FE) (1997)
/Page-1535004.png)
Depress REAR LH Switch
NOTE: When inspecting the "REAR LH" position, push the "REAR LH" switch instead of the POWER SWITCH, and you can inspect in any
selector switch position.
6. Push MOTOR switch.
Depress MOTOR Switch
(a) Push and hold in the MOTOR switch for a few seconds.
(b) Stop the engine.
7. Disconnect Actuator checker (SST) from Actuator.
Remove the "SHEET A". (SST) and disconnect the Actuator checker (SST) and sub-wire harness (SST) from the Actuator, Control Relay and
body side wire harness.
SST 09990 - 00150, 09990 - 00163, 09990 - 00200, 09990 -00300
8. Connect connectors.
(a) Connect the connector to the Actuator.
(b) Connect the 2 connectors to the Control Relay.
9. Clear Diagnostic Trouble Code (DTC).
