RAV4 4-Door 4WD L4-2.0L (3S-FE) (1997)
/Page-464010.png)
19. Install RH engine mounting insulator.
(a)
Attach the mounting insulator to the body and mounting bracket with the 4 bolts and 2 nuts.
(b) Tighten the 3 bolts holding the mounting insulator to the body.
Torque: 64 Nm (47 ft. lbs.)
(c)
Tighten the 2 nuts and bolt holding the mounting insulator to the mounting bracket.
Torque:
Bolt: 37 Nm (27 ft. lbs.)
Nut: 52 Nm (38 ft. lbs.)
20. Install and adjust Power Steering (PS) pump drive belt.
21. Install RH engine under cover.
22. Install RH front wheel.
23. w/ABS: Install No. 3 ABS actuator bracket.
24. Install generator bracket.
(a)
Install the bracket with the 3 bolts.
Torque: 42 Nm (31 ft. lbs.)
(b) Connect the ground strap connector.
25. Install generator. Refer to Starting and Charging.
26. Install wire harness bracket for Data Link Connector (DLC)1.
27. Install PS reservoir bracket and reservoir.
