RAV4 4-Door 4WD L4-2.0L (3S-FE) (1997)
/Page-976001.png)
Fuel Pump Relay: Testing and Inspection
COMPONENTS FOR REMOVAL AND INSTALLATION
CIRCUIT OPENING RELAY INSPECTION
1. REMOVE CIRCUIT OPENING RELAY
2. INSPECT CIRCUIT OPENING RELAY
A. Inspect relay continuity
(a) Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay.
(b) Check that there is no continuity between terminals 3 and 5.
If there is continuity, replace the relay.
B. Inspect relay operation
