RAV4 4-Door 4WD L4-2.0L (3S-FE) (1997)
/Page-1048002.png)
3. REMOVE CRANKSHAFT POSITION SENSOR
Remove the bolt and disconnect the crankshaft position sensor
CRANKSHAFT POSITION SENSOR INSTALLATION
1. INSTALL CRANKSHAFT POSITION SENSOR
Install the crankshaft position sensor with the bolt.
Torque: 9.5 N.m (95 kgf.cm, 82 in.lbf)
2. INSTALL NO.1 TIMING BELT COVER
3. CONNECT CRANKSHAFT POSITION SENSOR CONNECTOR TO GENERATOR DRIVE BELT ADJUSTING BAR
