RAV4 4-Door 4WD L4-2.0L (3S-FE) (1997)
Wheel Speed Sensor: Service and Repair
Front
Front Speed Sensor Components
REMOVAL
Disconnect Speed Sensor
1. Disconnect Speed Sensor connector.
(a) Remove the fender liner.
(b) Disconnect the Speed Sensor connector.
2. Remove Speed Sensor.
(a) Remove the 4 clamp bolts holding the sensor harness to the body and Steering Knuckle.
Torque: 5.0 Nm (48 inch lbs.)
Remove Speed Sensor
(b) Remove the Speed Sensor from the Steering Knuckle.
Torque: 8.0 Nm (69 inch lbs.)
INSTALLATION
Installation is in the reverse order of removal.
After installation, check Speed Sensor signal.