RAV4 4-Door 4WD L4-2.0L (3S-FE) (1997)
7. Disassemble No.1 differential case.
Remove these parts from the No.1 differential case:
-
4 differential pinion shafts
-
Pinion shaft holder
-
4 differential pinions
-
4 differential pinion thrust washers
-
Differential side gear subassembly
-
Conical spring washer
-
No.2 differential side gear thrust washer
8. Remove tapered roller bearing.
No.2 Differential Case Side:
Using Special Service Tool (SST) 09950 - 00020, 09950 - 00030, 09950 - 60010 (09951 - 00520) or equivalent, remove the tapered roller
bearing.
No.1 Differential Case Side:
Using SST 09950 - 00020, 09950 - 00030, 09950 - 60010 (09951 - 00450), remove the tapered roller bearing.