RAV4 4-Door 4WD L4-2.0L (3S-FE) (1997)
/Page-2087001.png)
Power Window Circuit Breaker: Testing and Inspection
INSPECT CIRCUIT BREAKER OPERATION
Driver's Door
1. With the window in the fully closed position, hold the power window switch in the UP position and check that there is a circuit breaker operation
noise within 4 to 40 seconds.
2. With the window in the fully closed position, hold the switch in DOWN" position and check that the window begins to descend within 60 seconds.
If operation is not as specified, replace the motor.
Passenger's Door
1. With the window in the fully closed position, hold the power window switch in "UP" position and check that there is a circuit breaker operation
noise within 4 to 40 seconds.
2. With the window in the fully closed position, hold the switch in "DOWN" position and check that the window begins to descend within 60
seconds. If operation is not as specified. replace the motor.
