RAV4 4WD L4-2.0L (1AZ-FE) (2001)
a. Using a knife, cut away any rough areas on the body.
HINT: Leave as much of the adhesive on the body as possible.
b. Clean the cutting surface of the adhesive with a piece of shop rag saturated in cleaner.
HINT: Even if all the adhesive has been removed, clean the body.
2. CLEAN REMOVED GLASS
a. Remove the damaged spacers.
b. Using a scraper, remove the adhesive sticking to the glass.
c. Clean the glass with cleaner.
NOTE:
-
Be careful not to damage the glass.
-
Do not touch the glass after cleaning it.
3. INSTALL NEW SPACERS
Attach 2 new spacers on the edge of the glass as shown in the illustration.
4. POSITION GLASS