RAV4 4WD L4-2.0L (1AZ-FE) (2001)
Front Fender Liner: Service and Repair
Front Apron to Cowl Side Upper Member (Assembly)
FRONT APRON TO COWL SIDE UPPER MEMBER (ASSEMBLY)
REPLACEMENT
1. REMOVE RADIATOR UPPER SUPPORT
2. REMOVE FRONT FENDER FRONT APRON
3. REMOVE COWL TOP SIDE PANEL
4. REMOVE FRONT APRON TO COWL SIDE UPPER MEMBER
a. Replace the front fender apron rear reinforcement at the same time.
5. INSTALL FRONT APRON TO COWL SIDE UPPER MEMBER
HINT: Inspect the fitting of the front fender and hood, etc. before welding, since this affects the appearance of the finish.