RAV4 4WD L4-2.0L (1AZ-FE) (2001)
/Page-333014.png)
a. Turn the crankshaft counterclockwise, and disconnect the plunger knock pin from the hook.
b. Turn the crankshaft clockwise, and check that the slipper is pushed by the plunger.
16. CHECK VALVE TIMING
a. Turn the crankshaft pulley, and align its groove with timing mark 0 of the timing chain cover.
NOTICE: Always turn the crankshaft clockwise.
b. Check that the timing marks of the camshaft timing sprocket and VVT timing sprocket are aligned with the timing marks of the No. 1 and No.
2 bearing caps as shown in the illustration.
If not, turn the crankshaft 1 revolution (360°) and align the marks.
17. INSTALL CYLINDER HEAD COVER
a. Remove any old packing (FIPG) material.
