toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Windshield Base - Ticking Noise On Bumps|Page 4567 > < Windshield Base - Ticking Noise On Bumps|Page 4565
Page 4
background image

Prepare three more pieces of EPT sealer for the RH side cowl louver (covering the battery).

10.

Trim the EPT sealer to match the shape of the cowl louver.

Repair Procedure:
Cowl Panel

1.

If you have confirmed that the tick sound continues with the cowl louver removed proceed with the following field fix.

2.

Once the cowl louver is removed, remove the wiper motor and link assembly. Unclip the wiper motor's wire harness from the cowl panel.

3.

Remove the cowl panel and remove the original 2 pieces EPT sealer from the cowl panel.

4.

Prepare the three new pieces of EPT sealer as shown.

Windshield Base - Ticking Noise On Bumps|Page 4567 > < Windshield Base - Ticking Noise On Bumps|Page 4565