RAV4 4WD L4-2.0L (1AZ-FE) (2001)
/Page-1122002.png)
d. Connect the connector to A/C amplifier and inspect wire harness side connector from the back side, as shown in the table.
Test conditions:
-
Running engine at idle speed
-
A/C switch ON
-
Temperature damper control dial at "MAX. COOL" position
-
Blower speed control switch at "HI" position
-
Set on manifold gauge set
If the circuit value is not as specified, replace the amplifier. If the circuit value is as specified, inspect the circuits connected to other parts.
