RAV4 4WD L4-2.0L (1AZ-FE) (2001)
/Page-188001.png)
Alignment: Service and Repair
Front Wheel Alignment
NOTICE: For Zero Point Calibration information, please refer to: TSB T-SB-0020-8 (3/25/08).
INSPECTION
1. MEASURE VEHICLE HEIGHT
(a) Bounce the vehicle.
(b) Measure the front vehicle height.
Measure the distance from the ground to the center of the lower suspension arm front mounting bolt.
(c) Measure the rear vehicle height.
Measure the distance from the ground to the center of the body side No. 1 suspension arm mounting bolt.
Front vehicle height:
Rear vehicle height (3-door):
Rear vehicle height (5-door):
