toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

SS004R-01 > < Engine Controls - Harsh Shifts/Multiple DTC's/MIL ON
Page 2
background image

Parts Information

Required SSTs

NOTE:

Additional Diagnostic Tester Kits, Program Cards, or other SSTs may be ordered by calling SPX-OTC at 1-800-933-8335.

Inspection Procedure

1.

If the vehicle is currently exhibiting a harsh shift condition and/or M.I.L. "ON" with DTC P0750, P0753, P0755, P0758, and/or P1760 stored,
refer to the Technical Information System (TIS), 2001 - 2003 model year RAV4 Repair Manual:

^

4WD: Diagnostics/Automatic Transaxle (U140f): Problem Symptoms Table

^

2WD: Diagnostics/Automatic Transaxle (U142E): Problem Symptoms Table

NOTE:

In some instances the vehicle must be operated at least 30 minutes before the condition can be duplicated.

2.

If the vehicle exhibits the above condition, replace the ECM (PCM).

Repair Procedure

1.

Replace the ECM (PCM). Refer to TIS, 2001 - 2003 model year RAV4 Repair Manual: SFI: Engine Control Module (ECM): Components.

2.

Test drive the vehicle until the engine reaches normal operating temperature to confirm that the vehicle is repaired.

NOTE:

^

In some instances the vehicle must be operated at least 30 minutes before the condition can be duplicated.

^

If the condition is still present after ECM replacement, the automatic transaxle assembly may also require replacement.

SS004R-01 > < Engine Controls - Harsh Shifts/Multiple DTC's/MIL ON