toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Air-Fuel Ratio (A/F) Sensor|Page 2603 > < Engine Controls - A/F And O2 Sensor Identification|Page 2600
Page 1
background image

Oxygen Sensor: Testing and Inspection
Air-Fuel Ratio (A/F) Sensor

INSPECTION

INSPECT HEATER RESISTANCE OF A/F SENSORS

a. Disconnect the sensor connector.

b. Using an ohmmeter, measure the resistance between terminals +B and HT.

Resistance
If the resistance is not as specified, replace the sensor. 

Torque: 44 N.m (450 kg.cm, 32 ft.lb)

c. Reconnect the sensor connector.

Air-Fuel Ratio (A/F) Sensor|Page 2603 > < Engine Controls - A/F And O2 Sensor Identification|Page 2600