RAV4 4WD L4-2.0L (1AZ-FE) (2001)
/Page-458001.png)
Oxygen Sensor: Testing and Inspection
Heated Oxygen Sensor
INSPECTION
INSPECT HEATER RESISTANCE OF OXYGEN SENSOR
a. Disconnect the sensor connector.
b. Using an ohmmeter, measure the resistance between terminals +B and HT.
Resistance
If the resistance is not as specified, replace the sensor.
Torque: 44 N.m (450 kg.cm, 32 ft.lb)
c. Reconnect the sensor connector.
