toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Replacement Requirements|Page 4828 > < Replacement Requirements|Page 4826
Page 8
background image

Cover the steering wheel pad with the cardboard box and weight the cardboard box down in 4 places with at least 190 N (20 kg, 44 lb).

Size of cardboard box:
Must exceed the following dimensions:
X=460mm (1&11 in.)
V =650 mm (25.59 in.)

NOTE:
-

When dimension V of the cardboard box exceeds the diameter of the disc wheel with tire to which the steering wheel pad is tied, X should be
the following size. X =460 mm (18.11 in.) + width of tire

-

If a cardboard box smaller than the specified size is used, the cardboard box will be broken by the shock from the airbag deployment.

-

Covering method using tires:
Place at least 3 tires without disc wheel on top of the disc wheel with tire to which the steering wheel pad is tied.

Tire size: Must exceed the following dimensions:
Width: 185 mm (7.28 in.)
Inner diameter: 360 mm (14.17 in.)

CAUTION:  Do not use tires with disc wheels.

NOTE:  The tires may be marked by the airbag deployment, so use the redundant tires.

h. Deploy the airbag.

1. Connect the SST red clip to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.

2. Check that no one is within 10 m (33 ft) area around the disc wheel which the steering wheel pad is tied to.
3. Press the SST activation switch and deploy the air-bag.

HINT:  The airbag deploys simultaneously as the LED of the SST activation switch lights up.

Replacement Requirements|Page 4828 > < Replacement Requirements|Page 4826