RAV4 4WD L4-2.0L (1AZ-FE) (2001)
a. Disconnect the throttle position sensor connector.
b. Disconnect the IAC valve connector.
c. Disconnect the 2 water bypass hoses and vacuum hose from the throttle body.
d. Remove the 3 bolts, fuel hose clamp, throttle body and gasket from the intake manifold.
INSTALLATION
1. INSTALL THROTTLE BODY
a. Align the protrusion of a new gasket with the groove of the intake manifold.
b. Attach the gasket to the intake manifold.
c. Install the throttle body and fuel hose clamp with the 3 bolts.
Torque: 30 N.m (305 kg.cm, 22 ft.lb)
d. Connect the 2 water bypass hoses and vacuum hose to the throttle body.