RAV4 4WD L4-2.0L (1AZ-FE) (2001)
REMOVAL
REMOVE STARTER
a. A/T: Disconnect the hose from the fluid level guide.
b. Disconnect the starter connector.
c. Remove the 2 bolts and pull out the starter.
d. Remove the nut, and disconnect the starter wire.
e. Remove the starter.
INSTALLATION
INSTALL STARTER
a. Install the starter.
b. Connect the starter wire, and install the nut.
Torque: 8.8 N.m (86 kg.cm, 78 in.lb)
c. Install the 2 bolts.
Torque: 37 N.m (378 kg.cm, 28 ft.lb)
d. Connect the connector
e. A/T: Connect the hose to the fluid level guide.