RAV4 4WD L4-2.0L (1AZ-FE) (2001)
Place the dust cover and using a torx socket (T30) install the 4 bolts.
Torque: 8.0 Nm (85 kgf-cm, 71 inch lbs.)
3. INSTALL FRONT AXLE HUB
Using SST and a press, install the axle hub.
SST 09527-17011, 09950-60010 (09951-00370), 09950-70010 (09951-07150)
4. INSTALL LOWER BALL JOINT
(a) Install the lower ball joint with the nut.
Torque: 133 Nm (1,360 kgf-cm, 98 ft. lbs.)
(b) Install a new cotter pin. If the holes for cotter pin are not aligned, tighten the nut further up to 60°.