RAV4 4WD L4-2.0L (1AZ-FE) (2001)
Transmission Position Switch/Sensor: Service and Repair
ON-VEHICLE REPAIR
1. REMOVE LH ENGINE UNDER COVER
2. DISCONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR
3. REMOVE PARK/NEUTRAL POSITION SWITCH
a. Remove the nut, and disconnect the shift control cable from the park/neutral position switch.
b. Remove the nut, washer and control shaft lever.
c. Using a screwdriver, pry off the lock plate.
d. Remove the nut and lock plate.
e. Remove the 2 bolts and pull out the park/neutral position switch.