RAV4 4WD L4-2.0L (1AZ-FE) (2001)
Window up: INSPECT FRONT WINDOW JAM PROTECTION LIMIT SWITCH OPERATION
a. Disconnect the connector from the master switch.
b. Connect the positive (+) lead from the ohmmeter to terminal 17 and the negative (-) lead to terminal 2.
c. Connect the positive (+) lead from the battery to terminal 4 and the negative (-) lead to terminal 9.
d. Check that the continuity exists when the window goes up.
e. Check that the no continuity exists when the window is in the fully closed position.
If operation is not as specified, replace the motor.
Window down: INSPECT FRONT WINDOW JAM PROTECTION LIMIT SWITCH OPERATION
a. Connect the positive (+) lead from the ohmmeter to terminal 17 and the negative (-) lead to terminal 2.
b. Connect the positive (+) lead from the battery to terminal 9 and the negative (-) lead to terminal 4.
c. Check that the continuity exists when the window goes up.
d. Check that the no continuity exists when the window is in the fully opened position.