RAV4 4WD L4-2.0L (1AZ-FE) (2001)
/Page-1486004.png)
NOTE: If connecting the wire harness wrongly, the sensor might be damaged so caution is necessary.
INSPECT FRONT WINDOW JAM PROTECTION PULSE SWITCH OPERATION
a. Connect the positive (+) lead from the electrical tester to terminal 14 and the negative (-) lead to terminal 2.
b. Connect the positive (+) lead from the battery to terminal 4 and the negative (-) lead to terminal 9.
c. Check that pulse is generated during the motor running.
d. Reverse the polarity and check that the pulse is generated.
If operation is not as specified, replace the motor.
NOTE: If connecting the wire harness wrongly, the sensor might be damaged so caution is necessary.
