RAV4 4WD L4-2.0L (3S-FE) (1996)
Throttle Body: Testing and Inspection
On-Vehicle Inspection
1. INSPECT THROTTLE BODY
-
Check that the throttle linkage moves smoothly.
-
Check the vacuum at each port.
-
Start the engine.
-
Check the vacuum with your finger.
2. INSPECT THROTTLE POSITION SENSOR
-
Apply vacuum to the throttle opener.
-
Disconnect the sensor connector.
-
Using an ohmmeter, measure the resistance between each terminal.
-
Reconnect the sensor connector.
3. INSPECT AND ADJUST THROTTLE OPENER
A. Warm up engine
-
Allow the engine to warm up to normal operating temperature.