toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Keyless Entry Module > < Entry Lock And Unlock Switch (for Back Door)|Page 7334
Page 3
background image

(a) Install the handle by pushing and sliding it in the direction indicated by the arrows in the illustration.

(b) Connect the connector.

2. INSTALL FRONT DOOR OUTSIDE HANDLE COVER LH (for Driver Side) See: Body and Frame/Doors, Hood and Trunk/Doors/Front

Door/Service and Repair/Reassembly

3. INSTALL FRONT DOOR OUTSIDE HANDLE COVER RH (for Passenger Side) See: Body and Frame/Doors, Hood and Trunk/Doors/Front

Door/Service and Repair/Reassembly

4. INSTALL FRONT DOOR SERVICE HOLE COVER LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and

Repair/Reassembly

5. INSTALL FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service

and Repair/Reassembly

6. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and

Repair/Reassembly

7. INSTALL FRONT UPPER ARMREST BASE PANEL LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and

Repair/Reassembly

8. INSTALL FRONT LOWER DOOR FRAME BRACKET GARNISH LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front

Door/Service and Repair/Reassembly

Keyless Entry Module > < Entry Lock And Unlock Switch (for Back Door)|Page 7334