toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 7484 > < Initial Inspection and Diagnostic Overview|Page 7482
Page 2
background image

(a) There are 2 methods to end diagnostic mode. Use one of them.

(1) Turn the ignition switch off.
(2) Press and hold the "DISP" switch for 3 seconds.

3. DIAGNOSIS MENU

(a) The "Diagnosis MENU" screen will be displayed by pressing the "Menu" switch on the "System Check Mode" screen.

4. CHECK DTC

Initial Inspection and Diagnostic Overview|Page 7484 > < Initial Inspection and Diagnostic Overview|Page 7482