RAV4 4WD L4-2.5L (2AR-FE) (2009)
Standard:
8. INSTALL NO. 2 BACK DOOR EMBLEM (w/o Tire Carrier)
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Install a new emblem.
(1) Using a heat light, heat the vehicle body and a new emblem.
(2) Remove the peeling paper from the face of the emblem.
HINT: After removing the peeling paper, keep the exposed adhesive free from foreign matter.
(3) Install the emblem in the position shown in the illustration.
HINT: Press the emblem firmly to install it.
Standard:
9. INSTALL NO. 4 BACK DOOR NAME PLATE (for 4WD)
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Install a new name plate.
(1) Using a heat light, heat the vehicle body and a new name plate.
(2) Remove the peeling paper from the face of the name plate.
HINT: After removing the peeling paper, keep the exposed adhesive free from foreign matter.
(3) Install the name plate in the position shown in the illustration.