RAV4 4WD L4-2.5L (2AR-FE) (2009)
Headliner: Service and Repair
Installation
INTERIOR: ROOF HEADLINING: INSTALLATION
INSTALLATION
1. INSTALL NO. 1 ROOF SILENCER PAD
(a) w/o Sliding Roof:
Install the 5 No. 1 silencer pads.
(b) w/ Sliding Roof:
Install the 2 No. 1 silencer pads.
2. INSTALL NO. 3 ROOF SILENCER PAD
(a) Install the No. 3 silencer pad.
3. INSTALL NO. 1 ROOF WIRE
HINT: Perform this procedure only when replacing the roof headlining.
(a) Install double-sided tape to the area marked on the roof headlining.
HINT: Make sure that dirt or foreign objects do not stick to the adhesive of the double-sided tape.
(b) Install the roof wire to the double-sided tape.
NOTE: Make sure the roof wire harness is attached securely.
4. INSTALL NO. 1 ROOF HEADLINING SUPPORT
(a) Install the No. 1 roof headlining support.
5. INSTALL NO. 2 ROOF HEADLINING SUPPORT
(a) Install the No. 2 roof headlining support.
6. INSTALL NO. 3 ROOF HEADLINING SUPPORT
(a) Install the No. 3 roof headlining support.
7. INSTALL NO. 4 ROOF HEADLINING SUPPORT
(a) Install the No. 4 roof headlining support.
8. INSTALL ROOF HEADLINING ASSEMBLY
(a) w/o Sliding Roof:
(1) Install the headlining with the 4 clips.
(b) w/ Sliding Roof:
(1) Install the headlining with the 2 clips.
(2) Connect the connector to the sliding roof drive gear.