RAV4 4WD L4-2.5L (2AR-FE) (2009)
/Page-1467001.png)
Braking Sensor/Switch: Testing and Inspection
BRAKE CONTROL: BRAKE PEDAL LOAD SENSING SWITCH: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT BRAKE PEDAL LOAD SENSING SWITCH
HINT:
-
Do not remove the brake pedal load sensing switch from the brake pedal support.
-
When there is a malfunction in the brake pedal load sensing switch, replace the brake pedal support.
(a) Disconnect the brake pedal load sensing switch connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the brake pedal support assembly See: Brake Pedal Assy/Service and Repair/Removal and
Replacement/Removal.
