RAV4 4WD L4-2.5L (2AR-FE) (2009)
/Page-1484002.png)
BRAKE CONTROL: DOWNHILL ASSIST CONTROL SWITCH: INSTALLATION
INSTALLATION
1. INSTALL DOWNHILL ASSIST CONTROL SWITCH
(a) Attach the 2 claws to install the switch.
2. INSTALL NO. 1 SWITCH HOLE BASE
(a) Install the No. 1 switch hole base See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Lower
Instrument Panel/Installation.
Removal
BRAKE CONTROL: DOWNHILL ASSIST CONTROL SWITCH: REMOVAL
REMOVAL
1. REMOVE NO. 1 SWITCH HOLE BASE
(a) Remove the No. 1 switch hole base See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Lower
Instrument Panel/Removal.
2. REMOVE DOWNHILL ASSIST CONTROL SWITCH
(a) Detach the 2 claws and remove the switch.
HINT: Tape the screwdriver tip before use.
