toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Front Speed Sensor|Page 4961 > < Front Speed Sensor|Page 4959
Page 6
background image

2. INSTALL FRONT FENDER LINER LH

HINT:  Install the fender liner so that the sensor wire harness passes beyond the fender liner installation clip towards the rear side of the
vehicle.

3. INSTALL FRONT WHEEL

Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. CHECK ABS SPEED SENSOR SIGNAL

(a) Check the speed sensor signal See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure.

Front Speed Sensor|Page 4961 > < Front Speed Sensor|Page 4959