RAV4 4WD L4-2.5L (2AR-FE) (2009)
/Page-1515004.png)
(a) Install the actuator with bracket with the 3 nuts.
Torque: 19 Nm (194 kgf-cm, 14 ft-lbf)
NOTICE:
-
Tighten the 3 nuts uniformly in alphabetical order.
-
Be careful not to damage the brake tubes.
-
Do not drop the actuator. If dropped, replace it.
(b) Connect the brake tube clamp to the bracket.
2. CONNECT BRAKE LINES
(a) Set each brake line in the correct position on the brake actuator as shown in the illustration.
