RAV4 4WD L4-2.5L (2AR-FE) (2009)
Parking Brake Lever: Testing and Inspection
PARKING BRAKE: PARKING BRAKE LEVER: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. CHECK PARKING BRAKE SWITCH ASSEMBLY
(a) Remove the rear console box See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Lower
Instrument Panel/Removal.
HINT: Refer to the procedures from the removal of the No. 1 console upper panel garnish up until the removal of the rear console box
sub-assembly.
(b) Disconnect the parking brake switch connector.
(c) Measure the resistance of the switch.
Standard Resistance:
If the result is not as specified, replace the switch assembly.