RAV4 4WD L4-2.5L (2AR-FE) (2009)
Traction Control Switch: Testing and Inspection
Downhill Assist Control Switch
BRAKE CONTROL: DOWNHILL ASSIST CONTROL SWITCH: INSPECTION
INSPECTION
1. CHECK DOWNHILL ASSIST CONTROL SWITCH
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the switch.
(b) Check the illumination operation.
(1) Connect the battery positive (+) lead to terminal 3 and negative (-) lead to terminal 2. Then check that the bulb illuminates.
OK:
Bulb illuminates.
If the result is not as specified, replace the switch.