toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Variable Valve Timing Actuator|Service and Repair > < Variable Valve Timing Actuator|Inspection

RAV4 4WD L4-2.5L (2AR-FE) (2009)

Page 1
background image

Variable Valve Timing Actuator: Testing and Inspection
On-Vehicle Inspection

2AR-FE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

(a) Connect the Techstream to the DLC3.
(b) Start the engine and turn the Techstream on.
(c) Warm up the engine.
(d) Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT System (Bank 1).
(e) Check the engine speed while operating the Oil Control Valve (OCV) using the Techstream.

Standard Condition:

If the operation is not as specified, check the oil control valve, wire harness and ECM.

Variable Valve Timing Actuator|Service and Repair > < Variable Valve Timing Actuator|Inspection