RAV4 4WD L4-2.5L (2AR-FE) (2009)
/Page-2630001.png)
Turn Signal Flasher: Testing and Inspection
LIGHTING: TURN SIGNAL FLASHER ASSEMBLY: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT TURN SIGNAL FLASHER CIRCUIT
(a) Check the power source circuit and ground circuit.
(1) Remove the turn signal flasher relay from the instrument panel junction block.
(2) Measure the voltage and resistance of the instrument panel junction block.
Standard voltage:
Standard resistance:
(b) Check the output operation signal.
(1) Install the turn signal flasher relay onto the instrument panel junction block.
