toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3161 > < Initial Inspection and Diagnostic Overview|Page 3159
Page 19
background image

(a) Disconnect the E68 No. 2 junction connector.
(b) Measure the resistance according to the value(s) in the table below.

Result

A -- CONNECT CONNECTOR
B -- Continue to next step.

23. CHECK FOR SHORT IN CAN BUS WIRES (NO. 2 JUNCTION CONNECTOR - POWER STEERING ECU)

(a) Measure the resistance according to the value(s) in the table below.

A -- CONNECT CONNECTOR
B -- Continue to next step.

Initial Inspection and Diagnostic Overview|Page 3161 > < Initial Inspection and Diagnostic Overview|Page 3159