RAV4 4WD L4-2.5L (2AR-FE) (2009)
(e) Push in the tube connector to the pipe until the tube connector makes a "click" sound.
NOTICE:
-
Before connecting the connector and fuel pipe, check that there is no damage or foreign matter on the connecting part of the fuel pipe.
-
After connecting the fuel tube connector and pipe, check that they are securely connected by trying to pull them apart.
(f) Install the No. 1 fuel pipe clamp.
3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY See: Computers and Control Systems/Engine Control Module/Service and Repair/Installation
4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY See: Throttle Body/Service and Repair/Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSPECT FOR FUEL LEAK See: Fuel Injector/Service and Repair/Installation