RAV4 4WD L4-2.5L (2AR-FE) (2009)
/Page-790002.png)
(b) Align the protrusion on the end of the air cleaner hose with the edge of the throttle body and connect the hose. Then, release the lock of the air
cleaner hose clamp to secure the clamp.
(c) Insert the hinge part of the air cleaner cap into the air cleaner case, then attach the 2 hook clamps.
(d) Connect the purge line hose to the clamp.
(e) Connect the No. 2 ventilation hose to the air cleaner hose.
(f) Connect the 2 purge line hoses to the purge VSV.
(g) Connect the 4 wire harness clamps.
(h) Connect the purge VSV connector.
