RAV4 4WD L4-2.5L (2AR-FE) (2009)
5. INSPECT NO. 3 COOLING FAN RELAY (FAN NO. 3)
(a) Remove the relay from the engine room No. 2 relay block.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the No. 3 cooling fan relay.
(c) Install the relay.
6. INSTALL ENGINE ROOM NO. 2 RELAY BLOCK COVER
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL