RAV4 4WD L4-2.5L (2AR-FE) (2009)
/Page-109001.png)
Ignition Relay: Testing and Inspection
Ignition Relay No. 2
2AR-FE ENGINE CONTROL SYSTEM: IGNITION RELAY NO. 2: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. INSPECT IG2 RELAY
(a) Remove the IG2 relay from the engine room No. 1 relay block.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
If the result is not as specified, replace the IG2 relay.
(c) Install the IG2 relay to the engine room No. 1 relay block.
