RAV4 4WD L4-2.5L (2AR-FE) (2009)
/Page-1603004.png)
11. Using a wrench to hold SST part A turn SST part B clockwise to tighten the generator pulley.
Torque: 58 N*m (591 kg*cm, 43 ft*lbf)
^
Use a torque wrench with a fulcrum length of 260 mm (10.24 in.).
^
This torque value is effective when the SST is parallel to a torque wrench.
12. Verify the alternator pulley rotates smoothly and install a new pulley cap.
13. Reinstall the alternator.
Refer to TIS 2009 model year RAV4 Repair Manual:
Power Source/Network - Battery/Charging - "2AR-FE Charging: Generator: Installation"
