RAV4 4WD L4-2.5L (2AR-FE) (2009)
/Page-1632004.png)
(e) Using a vernier caliper, measure the length of the snap ring.
Maximum length:
5.0 mm (0.197 in.)
If the length is more than the maximum, replace the snap ring with a new one.
4. INSTALL STARTER COMMUTATOR END FRAME COVER
(a) Install the starter commutator end frame cover to the starter commutator end frame.
5. INSTALL STARTER ARMATURE PLATE
(a) Insert the armature plate into the starter yoke.
(b) Align the keyway of the starter armature plate with the key inside the starter yoke, and install the starter armature plate.
6. INSTALL STARTER COMMUTATOR END FRAME ASSEMBLY
(a) Align the rubber of the end frame with the cutout of the starter yoke.
(b) Install the starter commutator end frame to the starter yoke.
NOTE: The magnet of the starter yoke may attract the starter armature when the starter commutator end frame is installed, causing the magnet
to break.
7. INSTALL STARTER YOKE ASSEMBLY
