toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

A/T - MIL ON/DTC P0741 Set|Page 4519 > < A/T - MIL ON/DTC P0741 Set
Page 2
background image

Warranty Information

APPLICABLE WARRANTY

^

This repair is covered under the Toyota Powertrain Warranty. This warranty is in effect for 60 months or 60,000 miles, whichever occurs first, from
the vehicle's in-service date.

^

Warranty application is limited to occurrence of the specified condition described in this bulletin.

Required Tools & Equipment

Additional TIS Techstream units may be ordered by calling Approved Dealer Equipment (ADE).

Repair Procedure Overview

1. Remove the transaxle assembly with torque converter.

2. Drain the ATF from the torque converter assembly.

3. Inspect the torque converter clutch oil seal.

4. Order repair parts based on oil seal inspection.

A. If the seal is damaged replace the torque converter assembly.

B. If the seal is OK replace the transaxle and torque converter assemblies with a REMAN ATM.

5. Install the transaxle assembly with torque converter.

6. Add ATF-WS.

7. Complete the repair.

Repair Procedure

1. Connect Techstream and check for DTCs stored in the Engine & ECT.

A. Is P0741 the only DTC stored?

A/T - MIL ON/DTC P0741 Set|Page 4519 > < A/T - MIL ON/DTC P0741 Set