RAV4 4WD L4-2.5L (2AR-FE) (2009)
19. REMOVE REAR DRIVE PINION FRONT TAPERED ROLLER BEARING
(a) Using SST, remove the rear drive pinion tapered roller bearing front (inner race) from the rear differential carrier.
SST: 09556-30010
20. REMOVE DIFFERENTIAL SIDE BEARING RETAINER
(a) Remove the 8 bolts.
(b) Using a brass bar and hammer, lightly tap out the differential side bearing retainer.
NOTE: Set the brass bar on the ribbed part of the differential side bearing retainer.
21. REMOVE DIFFERENTIAL CASE SUB-ASSEMBLY
(a) Remove the rear differential case from the rear differential carrier.
22. REMOVE DIFFERENTIAL DRIVE PINION
(a) Remove the differential drive pinion from the rear differential carrier.