RAV4 4WD L4-2.5L (2AR-FE) (2009)
Quarter Window Glass: Service and Repair
Installation
WINDSHIELD / WINDOWGLASS: QUARTER WINDOW GLASS: INSTALLATION
INSTALLATION
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed below are for the LH side.
-
A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard Bolt -
Specified Torque For Standard Bolts.
1. INSTALL QUARTER WINDOW ASSEMBLY LH
(a) Using a brush or sponge, apply primer M to the exposed part of the vehicle body.
NOTICE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Throw away any leftover primer.
-
Do not apply too much primer.
(b) Using a brush or sponge, apply primer G to the contact surface of the glass.
HINT: If primer is applied to an area that is specified, wipe off the primer with white gasoline before it dries.
NOTICE:
-
Allow the primer to dry for 3 minutes or more.
-
Throw away any leftover primer.