RAV4 4WD V6-3.5L (2GR-FE) (2006)
Hood Latch Release Cable: Service and Repair
HOOD LOCK CONTROL CABLE ASSEMBLY
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE RADIATOR SUPPORT OPENING COVER
3. REMOVE HOOD LOCK ASSEMBLY
a. w/ Hood courtesy switch: Disconnect the connector.
b. Remove the 3 bolts.
c. Disconnect the cable and remove the lock.
4. REMOVE HOOD LOCK CONTROL LEVER SUBASSEMBLY
a. Detach the 3 claws and remove the lever.
b. Disconnect the cable.