RAV4 4WD V6-3.5L (2GR-FE) (2006)
a. Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.
HINT: Heat the tape to 40 to 60 degrees C for approximately 1 to 2 minutes.
b. Wipe off the remaining double-sided tape using a clean cloth or equivalent.
CAUTION: If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not
adhere properly. Make sure to thoroughly removing the double-sided tape.
c. After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.