RAV4 4WD V6-3.5L (2GR-FE) (2006)
/Page-1891001.png)
Seat Heater Switch: Service and Repair
SEAT HEATER SWITCH
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE SWITCH BASE
3. REMOVE SEAT HEATER SWITCH
a. Using a screwdriver, detach the 2 claws and remove the switch.
HINT: Tape the screwdriver tip before use.
INSTALLATION
1. INSTALL SEAT HEATER SWITCH
a. Attach the 2 claws to install the switch.
2. INSTALL SWITCH BASE
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
