RAV4 4WD V6-3.5L (2GR-FE) (2006)
INSTALLATION
HINT: When installing the spoiler, heat the vehicle body and spoiler using a heat light.
NOTE: Do not heat the body and spoiler excessively.
1. INSTALL CENTER STOP LIGHT
a. Install the center stop light with the 2 screws.
2. INSTALL REAR SPOILER
a. Clean the vehicle body surface.
1. Using a heat light, heat the vehicle body surface.
b. If reusing the spoiler:
Clean the spoiler.
1. Using a heat light, heat the spoiler.
c. Connect the center stop light connector.
d. Install the spoiler with 3 clips.
e. Install the 3 bolts.